Q1.What Model of SSD Storage Does FXC A8800 Support 06/26/2026 / 319 What Types of SSD Storage are Supported by the FXC-A8800 Problem and Objective Objective: This article primarily guides users on how to independently purchase or expand SSD storage cards. Since the FXC-A8800 is an industrial-grade computing card, its SSD slot specifications differ from those of ordinary PCs. Therefore, when purchasing or replacing an SSD, users need to have a clear understanding of the supported model specifications to avoid buying incompatible storage devices that could affect normal operation. Problem Description **User Scenario:**Users plan to purchase and install or expand an SSD for the FXC-A8800 computing card but are unsure about the specific SSD specifications supported. **Trigger Condition:**When needing to replace or add an SSD storage device to the FXC-A8800. **Root Cause:**M.2 SSDs come in various physical dimensions (e.g., 2230, 2242, 2260, 2280) and different interface protocols (e.g., SATA, NVMe). If the purchased SSD has mismatched physical dimensions or an unsupported protocol, it will not be properly installed or recognized. Troubleshooting Process and Approach The FXC-A8800 computing card provides two SSD slots, allowing users to replace or expand SSDs independently, but there are specific specification requirements. Understand the common specification classifications of M.2 SSDs, focusing on two key dimensions: physical dimensions and interface protocols: **Physical Dimensions:**M.2 SSDs typically have a uniform width of 22mm, but their lengths vary, including 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and other specifications. **Interface Protocols:**The M.2 interface can support either the SATA protocol or the NVMe protocol (utilizing PCIe lanes). These two protocols differ in terms of transmission speed and physical interface characteristics. Solution According to the FXC-A8800 product specifications, its storage expansion provides two M.2 slots. Any SSD that meets the M.2 NVMe 2280 specification is supported. When making a specific purchase, please pay attention to the following three key points: The physical dimensions must be 2280: specifically, a width of 22mm and a length of 80mm. Common M.2 SSDs on the market also come in shorter sizes such as 2230 (30mm), 2242 (42mm), and 2260 (60mm). While these may physically fit into the M.2 slot, their mismatched length prevents proper securement with the mounting screw. On industrial-grade boards like the FXC-A8800, this can easily lead to poor contact due to vibration. It is strongly recommended to strictly adhere to the standard 2280 size. The interface protocol must be NVMe: The M.2 slots on the FXC-A8800 utilize PCIe lanes and support the NVMe protocol, offering extremely high read/write speeds. It is particularly important to note that there is another category of SSDs on the market that share the same M.2 2280 form factor but use the SATA protocol. These SATA-based M.2 SSDs typically feature two notches (B&M Key) on the physical interface, whereas NVMe SSDs usually have only one notch (M Key). The two are not interchangeable. An M.2 SSD using the SATA protocol will not be recognized by the system when inserted into the FXC-A8800. The FXC-A8800 can be factory-configured with pre-installed 1TB or 2TB NVMe SSDs. Users can refer to this capacity range when purchasing their own drives. Theoretically, the slot does not impose a strict upper limit on NVMe SSD capacity; mainstream capacities such as 1TB, 2TB, and 4TB are all compatible. However, it is recommended to prioritize well-known brands (e.g., Samsung, Western Digital, Kioxia) for their consumer-grade or industrial-grade products to ensure long-term stability and reliability for 7×24 continuous operation. If the issue persists after following the steps above, please send an email to Kiloview's technical support mailbox: [email protected]. Our engineers will assist you in resolving the problem. Previous:Q3.RF02 Master IP and Network Port Correspondence