Q1.D350D260 Reset Settings via Physical Button - Decoder Series - kiloview

Q1.D350D260 Reset Settings via Physical Button

12/24/2025 / 1477

Problem Background

When the device malfunctions due to improper parameter configuration and becomes inaccessible via the web management interface (e.g., forgotten network IP settings or inaccessible web UI), it can be reset using the physical button (RESET key).

Common Troubleshooting Approaches

Locate the RESET button on the device panel;
image.png
Press and hold the RESET button for more than 5 seconds;
After releasing the button, the device will automatically restore the factory settings and hard reboot, the reboot process lasts about 1 minute, during which time please wait patiently and do not disconnect the power or operate the button again.

1.What happens to the device after a reset?
After restoring the factory settings, the following parameters of the device will be restored to the default values:
Login information: User name and password are both restored to “admin”;
IP address:
Network port 1 default IP: 192.168.1.168, subnet mask: 255.255.255.0;
Network port 2 default IP: 192.168.2.168, subnet mask: 255.255. 255.255.0;

Other Parameters: All the configurations of decoding parameters and streaming service are restored to the factory default values.

2.How do I login to the device management page after a reset?
After reset, you can log in to the web management page in the following ways:
Viewing the IP address through the OLED display:
After the device is powered on, click the touch screen button on the front of the D350/D260 to switch the display to the currently connected network port, and then you can view the current IP address of the device;
image.png
Enter this IP address in your browser (format: http://IP address /) and log in using the default username admin and password admin.
Via default fixed IP address:
Enter the default IP address: http://192.168.1.168/ directly into your browser and log in using the default username “admin” and password “admin”.

3.What do I need to be aware of during the reset process?

  1. Make sure to press and hold the RESET button for no less than 5 seconds, otherwise the reset may not be triggered;
  2. Do not disconnect the power of the device or operate the button again during the reset process (about 1 minute) to avoid device malfunction;
  3. All the customized configurations will be cleared after the reset, so it is recommended to record the important parameters in advance (e.g. special network settings, decoding parameters, etc.).