Q3.Decode output screen is normal no audio 12/30/2025 / 935 Problem Background The decoder output screen is normal, but there is no audio, you need to check if the output window has audio turned on. Currently audio decoding supports MP2, MP3, G.711, AAC (AAC-LC, AAC-HE, AAC-HE-V2, AAC-LD). Common Troubleshooting Approaches 1. Log in to the device web management page Browser access to the decoder IP address, enter username and password to log in. 2. Check that the output window is turned on for audio output Check the speaker icon at the bottom left corner of the video source inside the output window, make sure the speaker is turned on. 3. Adjusting the output volume level Click the Mix Control button to enter the Mix Control screen. 4. Confirm that Audio Output is checked Audio Output in the upper right corner to confirm that Output is checked. 5. Confirm that the audio format of the video source can be supported You need to check the audio format of the video source, currently the audio decoding supports MP2, MP3, G.711, AAC (AAC-LC, AAC-HE, AAC-HE-V2, AAC-LD). Previous:Q2.Decode output HDMI to monitor display color abnormality such as screen pink Next:Q4.RD260 & RD350 routing policy does not take effect