Q2.Decode output HDMI to monitor display color abnormality such as screen pink 12/30/2025 / 894 Problem Background Since some monitors have different color space support which may cause abnormal colors on the display screen, you can modify the appropriate color space in the decoding output settings. The following is an explanation of each color space option: 1.RGB 4:4:4: RGB stands for Red, Green, Blue color channels.。 4:4:4 means that each color channel is fully sampled, i.e., each pixel contains information from the red, green and blue channels without any loss of color information. This is a lossless color representation and is commonly used in image and video editing and storage to retain the highest quality color information. 2.YCbCr 4:4:4: YCbCr represents the color representation of the luminance (Y) and the two chrominance (color difference) channels (Cb and Cr).The Y channel contains luminance information, while the Cb and Cr channels contain color difference information. 4:4:4 means that each color channel is fully sampled, similar to RGB 4:4:4, with no loss of color information. This type of color representation is commonly used in broadcast and video production to maintain high quality color information. 3.YCbCr 4:2:2: 4:2:2 means that the luminance channel (Y) is sampled at full, but the chrominance channels (Cb and Cr) are sampled at half the rate of the luminance channel. This means that every two neighboring pixels share a chrominance channel. This type of sampling reduces the resolution of the chrominance information, but is often used in video compression to reduce the amount of data while still maintaining relatively high visual quality. This is more common in digital video. 4.YCbCr 4:2:0: 4:2:0 means that the luminance channel (Y) is sampled at full scale, but the chrominance channels (Cb and Cr) are sampled at half the rate of the luminance channel and are sampled both horizontally and vertically. This type of sampling is used in video compression to reduce the amount of data, but loses more in color resolution. It is used in many digital video standards such as H.264 and HEVC. Common Troubleshooting Approaches 1. Log in to the device web management page Browser access to the decoder IP address, enter username and password to log in. 2. Output settings Click Video Output at the top right of the Output window. 3. Color space setting Click HDMI Color Mode to select the options RGB444, YCBCR444, YCBCR422, YCBCR420 as desired. 4. After selecting the desired color space, click OK. Previous:Q1.Decoder fails to auto-discover NDI streams Next:Q3.Decode output screen is normal no audio