Q11.What's the difference between "Local Streaming" and "Bonding Streaming" in the device backend? When to use each? How to choose if problems occur? - P-Series & Kilolink Server Pro - kiloview

Q11.What's the difference between "Local Streaming" and "Bonding Streaming" in the device backend? When to use each? How to choose if problems occur?

12/26/2025 / 740

A1. clarify the core differences and applicable scenarios.

Type Core Characteristics Applicable Scenarios Advantages/Disadvantages

Type Core Characteristics Applicable Scenarios Advantages / Disadvantages
Local Streaming Streams directly from the device to the target platform (e.g., RTMP push). Single scenario,stable network (e.g., fixed studio with wired network). **Advantages:**Low latency, simple operation. **Disadvantages:**Uses only a single link; prone to lag if the network fluctuates.
Bonding Streaming Combines bandwidth from multiple links (4G/5G/Wi-Fi/Wired) for streaming. Mobile scenarios,weak network environments (e.g., outdoor live broadcast, event sites). **Advantages:**Bandwidth aggregation, strong anti-interference. **Disadvantages:**Requires KiloLink Server Pro; slightly higher latency.

Local Streaming Streams directly from the device to the target platform (e.g., RTMP push). Single scenario, stable network (e.g., fixed studio wired network). Advantages: Low latency, simple operation. Disadvantages: Uses only single link; prone to lag if network fluctuates.

Bonding Streaming Combines bandwidth from multiple links (4G/5G/Wi-Fi/Wired) for streaming. Mobile scenarios, weak network environments (e.g., outdoor live broadcast, event sites). Advantages: Bandwidth aggregation, strong anti-interference. Disadvantages: Requires KiloLink Server Pro; slightly higher latency.

A2. Common Problems and Selection Suggestions.

Problem 1: Local streaming is laggy, bonding streaming is smoother?

  • Troubleshooting Reason: Local streaming uses a single link; bonding aggregates multiple links for more bandwidth.
  • Solution Suggestion: Prioritize using bonding streaming. Deselect links with poor signal. Ensure KiloLink Server Pro connection is normal.

Problem 2: Pursuing low latency, don't want to use bonding?

  • Troubleshooting Reason: Bonding streaming has slightly higher latency than local streaming due to multi-link buffering.
  • Solution Suggestion: If the on-site network is stable (e.g., Gigabit wired), choose "Local Streaming" and disable VBR, use CBR fixed bitrate. If the network is fluctuating, still switch to bonding streaming and set the buffer time to "200-300ms" to balance latency and smoothness.

Problem 3: Local streaming works, but bonding cannot connect to the server?

  • Troubleshooting Reason: Incorrect server IP/Port/Authorization code for bonding, or port forwarding not configured.

  • Solution Suggestion: Verify the KiloLink Server Pro's "IP/Port/Authorization Code" (re-enter in the device's "Bonding Settings"). If the device is on an external network, configure "Port Forwarding" on the server's router (forward the bonding port, default 50000).