Q6.How to troubleshoot if the P3&P3mini cannot be previewed on the web - P-Series & Kilolink Server Pro - kiloview

Q6.How to troubleshoot if the P3&P3mini cannot be previewed on the web

12/30/2025 / 684

After signal acquisition, the encoder outputs directly to the preview module without any encoding processing.

If the screen cannot be previewed on the web, it may be caused by various issues.

The following are detailed troubleshooting steps to help you identify and solve problems.

Troubleshooting steps

1. Confirm that the encoder cannot connect and check the video source recognition

Problem analysis: If the image cannot be viewed on the web, the first step is to confirm whether the encoder is correctly connected to the video source and successfully recognized.

The video source information will display audio and video information on the device's configuration page or status panel.

If the video source cannot be identified, there may be the following reasons:

The encoder is not properly connected to the video source.

Compatibility issues between video sources and encoders.

EDID (Extended Display Identifier) issue.

Operation steps:

View video source information: Enter the device configuration interface and check the video source information.

If the audio and video formats of the video source are displayed, it indicates that the encoder has recognized the video source.
image.png

Troubleshooting EDID issues: If the video source information is not displayed completely or the screen cannot be displayed, it may be an EDID issue.

Please refer to another FAQ to learn how to solve EDID issues.

Peripheral hardware device failure: If the video source cannot be recognized, it may be due to a malfunction in external hardware (such as cameras, video input interfaces, etc.).

Try changing the video source or interface to see if it can be recognized properly.

Compatibility issue: Ensure that the video source is compatible with the input interface of the encoder.

For example, if using a high-definition signal source, confirm whether the encoder supports the resolution and signal format.

2. Change the browser and clear the cache

Problem analysis: If the encoder is correctly connected and recognizes the video source, but the web still cannot preview, it may be due to browser caching issues or compatibility issues with the browser itself, resulting in a black screen or inability to load the image.

Operation steps:
Using different browsers: Try accessing using Edge or Google Chrome, especially incognito mode, to avoid caching affecting video playback.

Force page refresh: Press Ctrl+F5 in the browser to forcibly clear the cache and reload the page.

This operation can sometimes solve display issues caused by caching.

3. Restart or reset the device

**Problem analysis: ** If after troubleshooting encoder and browser issues, it is still not possible to preview the screen on the web, it may be an error caused by unstable device or system status.

Operation steps:

Restart the encoder: Try restarting the encoder device, clearing any possible temporary faults or memory issues, ensuring that the device can reload and initialize the video source.

Factory reset: If the above steps do not solve the problem, consider resetting the encoder to factory settings.

Note that restoring factory settings will clear all configurations and require resetting the device.

4. Network configuration and firewall inspection

**Problem analysis: ** If the encoder cannot preview through the web, network configuration and firewall settings may also be one of the reasons.

For example, a firewall may block communication between devices and browsers, or the network connection between devices and servers may be unstable.

Operation steps:

Check firewall configuration: Ensure that the firewall allows access to the encoder's web port.

If using default HTTP ports (such as 80 or 8080), please ensure that the firewall is not blocking these ports.

Confirm preview method: If the access is made by jumping from the Kilolink Server Pro to the device's web page, and the computer accessing Kilolink Server Pro is not on the same LAN as the device, then the preview screen cannot be seen due to network NAT penetration, which is a normal phenomenon.