文章目录
- Q1: What is the default login IP of the decoder.
- Q2: What is the login account and password of the decoder?
- Q3: The login page cannot be displayed or the display is incomplete.
- Q4: How to recover the forgotten IP or login account.
- Q5: The device cannot be turned on when connected to the power supply, and the power light does not turn on.
Q1: What is the default login IP of the decoder.
A1: The default login IP address is 192.168.1.168.
Q2: What is the login account and password of the decoder?
A2: The default login account and password are both admin.
Q3: The login page cannot be displayed or the display is incomplete.
A3: It is recommended to change the browser and choose Google or Firefox with better compatibility to log in again.
Q4: How to recover the forgotten IP or login account.
A4: The RST reset button on the device panel, press for about 5 seconds, the device will restart to restore the factory default settings.
Q5: The device cannot be turned on when connected to the power supply, and the power light does not turn on.
A5: Check whether the power adapter is connected, please use the power adapter originally provided by the manufacturer. Replace or eliminate the fault of the power adapter. If the POWER indicator still does not light up after the device is powered on, please contact the manufacturer or supplier for repair or replacement.
Articles
- Video decoder
- Similarities and differences between D300 and MG300
- Some decoders or decoding software cannot correctly decode the encoder’s video and audio
- What is the default IP address of the video decoder?
- The decoded video source keeps showing “Connecting” what is the problem.
- Added a video source, why there is no video output.
- Video decoder audio decoding output common problems
- Frequently Asked Questions about Video Decoder Display Screen
- Frequently Asked Questions about Video Decoder Software Firmware Version