{"id":10688,"date":"2021-04-09T14:57:52","date_gmt":"2021-04-09T06:57:52","guid":{"rendered":"https:\/\/www.kiloview.com\/en\/?p=10688"},"modified":"2025-09-30T16:48:42","modified_gmt":"2025-09-30T08:48:42","slug":"srt-configuration-guide-with-vmix-for-kiloview-encoder-decoder","status":"publish","type":"post","link":"https:\/\/www.kiloview.com\/en\/srt-configuration-guide-with-vmix-for-kiloview-encoder-decoder\/","title":{"rendered":"SRT Configuration Guide with vMix ( For Kiloview Encoder\/Decoder)"},"content":{"rendered":"\n

\u4e00\u3001vMix receives SRT stream from encoder via Listener mode
1\u3001Open vMis, click \u201cAdd input- More\u201d and then choose Stream\/SRT as following picture:<\/p>\n\n\n

\"\"<\/figure>\n\n\n

2\u3001Choose \u201cStream Type\u201d as \u201cSRT (Listener)\u201d, then configure \u201cPort\u201d \u201cLatency\u201d \u201cPassphrase\u201d ( if need), \u201c Decoder Delay\u201d, then click \u201c OK\u201d to finish the configuration. <\/p>\n\n\n

\"\"<\/figure>\n\n\n

3\u3001In the vMix web management, you can get that vMix is listening SRT stream in Input1, if no stream, then it shows black screen. <\/p>\n\n\n

\"\"<\/figure>\n\n\n

4\u3001If use Kiloview encoder as caller to connect SRT, then please configure \u201cHandshake mode\u201d, IP address\u201d, port\u201d\u201dTransport latency\u201d and so on. (The parameter should be corresponded to that of vMix)<\/p>\n\n\n

\"\"<\/figure>\n\n\n

5\u3001After the SRT is properly connected, the vmix can receive and display the video image transmitted by the encoder normally.<\/p>\n\n\n

\"\"<\/figure>\n\n\n

\u4e8c\u3001vMix pushes SRT stream to decoder in Caller mode
1\u3001Click on the  button at the bottom and select "Output\/NDI\/SRT Settings"<\/p>\n\n\n

\"\"<\/figure>\n\n\n

2.Pop up the Settings menu and select the \u201cOutputs\/NDI\/SRT\u201d option. 
The source of "Output" selects the video source to be transmitted (if Input1 is selected, it is necessary to ensure that Input1 has a video signal). Click  to pop up the \u201cOutput Settings\u201d dialog box, check \u201cEnable SRT\u201d, select \u201cType\u201d- \u201cCaller\u201d, \u201cHostname\u201d, \u201cPort\u201d, \u201cLatency\u201d, \u201cPassphrase\u201d and \u201cQuality\u201d. Configure the corresponding parameters, check "Use Hardware Encoder" and click "OK" to confirm. (Normally "Use Hardware Encoder" needs to be selected manually to improve coding ability)<\/p>\n\n\n

\"\"
Note:<\/strong> After modifying the parameters, the vMix program may need to be restarted for the parameters to take effect.<\/figcaption><\/figure>\n\n\n

2\u3001Add a SRT video source to receive SRT stream to a Kiloview decoder, set \u201dname\u201d, \u201cHandshake mode\u201d as \u201cListener\u201d.
\u201cPort\u201d and \u201cTransport delay\u201d can be configured the same with vMix.<\/p>\n\n\n

\"\"<\/figure>\n\n\n

3\u3001Please check the SRT handshake mode connection if it\u2019s normal with the decoder, and to see if there is any video output. If not, please click    on the left side of \u201dExternal\u201d, to select \u201cSRT\u201d-\u201dEnable\u201d option, to configure the device again and turn off , then to restart vMix stream. (Enable means that the stream status is on.)  <\/p>\n\n\n

\"\"<\/figure>\n","protected":false},"excerpt":{"rendered":"

SRT Configuration Guide with vMix ( For Kiloview Encoder\/Decoder)<\/p>\n","protected":false},"author":1,"featured_media":10721,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-10688","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/posts\/10688","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/comments?post=10688"}],"version-history":[{"count":1,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/posts\/10688\/revisions"}],"predecessor-version":[{"id":55490,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/posts\/10688\/revisions\/55490"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/media\/10721"}],"wp:attachment":[{"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/media?parent=10688"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/categories?post=10688"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kiloview.com\/en\/wp-json\/wp\/v2\/tags?post=10688"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}