Release Date: 2024.12.26 Version: 2.03.0007
New Features:
1.Upgraded to NDI 6, with added support for NDI Bridge functionality.
2.Added support for RTSP and RTMP protocols. (Currently, RTMP only supports H.264 encoding).
3.Added de-interlacing feature for streaming protocols, which can be enabled or disabled as needed, supporting video encoding for interlaced scan formats.
Improvements:
1.KIS intercom optimization: Fixed the occasional issue where audio could not be sent during voice calls. The updated voice call feature is more stable. (Optimizations are based on KIS version 0025 and above).
2.Optimized system maintenance features, now allowing users to customize device reboot times, which can be set to any time of the day.
Bug Fixes:
1.Fixed issues with shared memory plugin under multiple protocols, which occasionally caused stream pulling failures.
2.Fixed sporadic device configuration data loss issues.
3.Fixed memory leak issues on the device.
4.Fixed system freeze that occurred when switching decoder sources, which caused the web interface to fail to display.
5.Fixed occasional device crashes in unicast mode.
Notes:
1.In high bitrate (>80M) encoding scenarios, it is not recommended to perform encoding and recording simultaneously due to device and storage performance considerations.
2.If the device is rebooted or the TF card/USB storage device is removed during recording, the recording file will become unplayable.
3.Avoid setting the same name for HB/HX stream channels, as this may cause recording failures.
4.When using Network Attached Storage (NAS) for video writing, ensure that the NAS has sufficient read/write resources; otherwise, the N60 may fail to load the storage device.
5.If the storage device’s read/write speed is insufficient, recording may automatically stop.
6.After rebooting the video source, NDI may reassign ports, which may result in no output for decoding. The decoder side should click the refresh button to update the decoding list.
7.When switching video source resolutions, the encoding output page will briefly go black for about 3 seconds.
8.Due to device performance limitations, it is not recommended to set YCbCr 4:2:2 10bit encoding when encoding 4KP60 H.265.
9.In NDI Bridge mode, unstable network conditions may cause audio and video to fall out of sync or result in stuttering