You can add up to nine preset decoding sources, by clicking the NDI sources, the device will start decoding the corresponding NDI source. It can be quickly switched and decoded by clicking different NDI sources. By clicking x in the upper right corner of the NDI source in the preset box, you can delete the added source.

There is a blank output box in decoding preset, if switching to a source without video output, the device will output the set color. It can also be used for testing the output to the monitor by choosing a different color.

Click the icon on the right to set parameters for smooth switch. To make sure the smooth switch, if it is a big video or slow transmission, a longer smooth time can be set. Otherwise it will show the blank screen set previously when output is not ready after switching.

The decoding output switch can also be controlled via keypad (connect with USB), and first you need to connect the keypad by USB.

Press 【NumLock】 on the keypad, if the light is on, you can operate the decoding switch. Press 1\~9 to select the corresponding 1~9 preset decoding source, and press 0 to select blank output.