1. Home
  2. Docs
  3. 1U/3U Rack-mounted video Encoders
  4. Encoding card board quick start
  5. Device installation and Connection
  6. Device login

Device login

  1. Default IP address
    The default IP address is 192.168.1.168 with subnet mask 255.255.255.0.
    Normally, you don’t need to modify this IP address.
  2. IP Configuration
    Configure the IP address by clicking: "Network and Internet Settings-"Network and Sharing Center"-"Ethernet"-"Internet Protocol Version 4"-" Use the IP address below ", then manually enter the IP address with 192.168.1.( refers to numbers between 1-255 except 168) and subnet mask, and click "OK".
  3. Log in the WEB Console
    Enter 192.168.1.168 or http://192.168.1.168 in the browser URL to login the web console, and enter the username and password.
    Login username: admin; Password: admin.
  4. IP address configuration
    After login, you can configure the IP according to the network, the IP will be used for streaming and device management. You can configure it to “manually” or “DHCP” (Default set is DHCP). And the IP can be used to login to the device directly.

6.png

How can we help?