1. Home
  2. Docs
  3. NDI E1/E2 wired encoder
  4. USER MANUAL
  5. Operation guidance

Operation guidance

Installation and connection of the device
Connect the power and video input source correctly, power on the device.

Network Connection and Configuration
The simplest way is that the encoder accesses the network via Ethernet, and the device automatically gets an IP address from the network. Without any settings for the device, the encoder can be automatically found and pulled by other NDI devices in the network.

If you want to set up the network manually, you can use the device failsafe IP address (192.168.1.168) to login the WEB page for setting up(default username and password is :admin/admin).

NDI Pulling stream
NDI has the function of automatic discovery. After the encoder is normally connected to the network, other NDI-supporting tools (such as Newtek studio monitor, OBS, vMix) can be used to automatically discover the encoder and pull its NDI video stream directly.。

Other streaming service
If necessary, you can also configure the device to push video streams such as RTMP, RTMPS,UDP, HLS, SRT,etc..

How can we help?