Low latency and high stability are always the core of choosing HD video encoders. The best choice for video encoders is to see if the bit rate and averaging period can be controlled with minimal video quality impact, in an effort to achieve low latency and high latency. At the time of quality, a video encoder with sub-frame rate control. In order to smoothly transmit 1080P/60 frames of high-definition video data over a limited broadband network, we must use dedicated video processing chips and innovate in architecture and algorithms, while ensuring the quality of HD video quality. In order to improve the compression ratio of video coding, the video end-to-end transmission delay can be as low as 100ms or less.
Kiloview uses NDI technology in the LAN. NDI is a low-latency, high-quality transmission protocol. The end-to-end delay in the LAN is only 1-3 frames (about tens of milliseconds, while the traditional RTSP The transmission end-to-end takes about 300 milliseconds), which is a typical representative of low-latency transmission technology on the market. The N20 converters supports up to 4K P60 UHD resolution, supports Tally display and PoE power supply, ensures accurate video frame synchronization, and accurate picture and audio synchronization through precise clock and intelligent algorithms.
High-stability encoders are also one of the cores. First, the H.264 coding standard is preferred. In order to ensure the smooth transmission and storage of video images, each video stream must be able to reach 60 frames per second. In addition to ensuring the smooth transmission of high-definition video, the real-time requirements for video are also very high.
SRT is a point-to-point transmission technology that does not require a transit platform, and has the advantages of “low latency, anti-network jitter”. All Kiloview encoders and D300 decoders supports the SRT transmission protocol. The end-to-end delay is as low as 1 second in the Internet transmission environment, and the screen still does not freeze after 20% network packet loss.
The SRT runs at the network transport level and acts as a wrapper around your content. This means it can transmit any type of video codec, resolution or frame rate. This is very important. SRT is designed to enable secure and reliable data transmission across unpredictable networks, optimized for real-time video streaming and shaping the future in simplifying the transition to IP-based solutions.
Kiloview has always been based on “professional + quality” as its core competitiveness. From its own R&D, production, sales and service, Kiloview always adheres to high standards and high requirements. Low latency technology + high stability transmission is always our core advantage.
